diff --git a/check_environment.py b/check_environment.py
index d2b4905..e74c273 100644
--- a/check_environment.py
+++ b/check_environment.py
@@ -19,7 +19,7 @@ if __name__ == '__main__':
         exit(x.m.rc * (-1) + 3)
     # now in theory the program is runnable
     x.m.setMsg("# job initialized")
-    cm = ulrich.componentHandling.ComponentManager()
+    cm = ulrich.componentHandling
     cm.initComponents()
     comps = cm.getComponents(PROGRAM_NAME)
     x.m.setMsg("# Components initialized with these relevant components " + str(comps))
diff --git a/components/catalog.py b/components/catalog.py
new file mode 100644
index 0000000..506817c
--- /dev/null
+++ b/components/catalog.py
@@ -0,0 +1,30 @@
+#
+# ------------------------------------
+"""
+a lot of test-results are created dynamically - so these dont belog to the testdata.
+In order to get an overview over the testcases these results should be imported into a database.
+"""
+from datetime import datetime
+import ulrich.message
+import ulrich.program
+import inspect
+import components.component
+
+
+class Catalog(components.component.CompData):
+
+    def init_Catalog(self):
+        """
+        initialize special tables in the catalog-database
+        :return:
+        """
+        pass
+
+    def check_Instance(self):
+        """
+        checks system-instances and writes it into the parameter-file
+        """
+        job = ulrich.program.Job.getInstance()
+        verify = -1 + job.getDebugLevel(self.name)
+        self.m.logInfo("--- " + str(inspect.currentframe().f_code.co_name) + "() started at " + datetime.now().strftime(
+            "%Y%m%d_%H%M%S") + " for " + str(self.name).upper())
diff --git a/components/component.py b/components/component.py
index 9f31565..ba55c24 100644
--- a/components/component.py
+++ b/components/component.py
@@ -2,14 +2,33 @@
 # ---------------------------------------------------------------------
 from datetime import datetime
 
+import components.sysmonitor
+import components.testrun
+import components.report
+import components.maintain
+import components.catalog
 import ulrich.message
+import ulrich.program
 import inspect
-"""
-A component represents an application of the system-under-test
-As the representation it has to knowlegde of the url, which other components depends on this component.
-During a test-run the component must be checked, prepared, appfiles has to be collected, etc. For this doing there are some standard-methods implemented.
-"""
-class Component:
+import threading
+
+
+class CompData:
+    def __init__(self):
+        self.name = ""
+        self.m = None
+        self.conf = None
+
+
+
+class Component(components.sysmonitor.SystemMonitor, components.testrun.Testrun, components.report.Report,
+                components.maintain.Maintainer, components.catalog, threading.Thread):
+    """
+    A component represents an application of the system-under-test or a data-artifact which is created from the system-under-test.
+    As the representation it has to knowlegde of the url, which other components depends on this component.
+    During a test-run the component must be checked, prepared, appfiles has to be collected, etc. For this doing there are some standard-methods implemented.
+    """
+
     def init(self):
         """
         The range of the test-system is defined by the dependancy graph which starts at the application.and indate each component.
@@ -24,209 +43,24 @@ class Component:
         verify = job.getDebugLevel(self.name)
         self.m.debug(verify, "--- " + str(inspect.currentframe().f_code.co_name) + "() " + str(self.name))
 
-
-    def prepare_system(self):
-        """
-        In order to preparate the test system test data should be cleaned and loaded with actual data.
-        This can happen on different granularities: for each testcase or for each test sequences or for a test set or
-        for a whole test.
-        The loaded test data should be selected for a later comparison.
-        :return:
-        """
-        pass
-    def init_Testset(self):
-        """
-        main methode for system-preparation
-        :param self:
-        :return:
-        """
-        job = ulrich.program.Job.getInstance()
-        verify = -1+job.getDebugLevel(self.name)
-        self.m.logInfo("--- " + str(inspect.currentframe().f_code.co_name) + "() started at " + datetime.now().strftime("%Y%m%d_%H%M%S") + " for " + str(self.name).upper())
-
-        self.m.setMsg("checkInstance for " + self.name + " is OK")
-        self.m.logInfo("--- " + str(inspect.currentframe().f_code.co_name) + "() finished at " + datetime.now().strftime("%Y%m%d_%H%M%S") + " for " + str(self.name).upper())
-
-    def reset_TsData(self):
-        job = ulrich.program.Job.getInstance()
-        verify = -1+job.getDebugLevel(self.name)
-        self.m.logDebug(verify, "--- " + str(inspect.currentframe().f_code.co_name) + "() started at " + datetime.now().strftime("%Y%m%d_%H%M%S") + " for " + str(self.name).upper())
-        if "log" in self.conf["artifact"]:
-            self.m.logInfo("log rotate  in "+ self.name)
-        if "db" in self.conf["artifact"]:
-            self.m.logInfo("delete db-content "+ self.name)
-        if "lob" in self.conf["artifact"]:
-            self.m.logInfo("lob is deleted with db "+ self.name)
-        if "file" in self.conf["artifact"]:
-            self.m.logInfo("rm files in "+ self.name)
-        self.m.setMsg("checkInstance for " + self.name + " is OK")
-        self.m.logDebug(verify, "--- " + str(inspect.currentframe().f_code.co_name) + "() finished at " + datetime.now().strftime("%Y%m%d_%H%M%S") + " for " + str(self.name).upper())
-    def load_TsData(self, testdata):
-        job = ulrich.program.Job.getInstance()
-        verify = -1+job.getDebugLevel(self.name)
-        self.m.logDebug(verify, "--- " + str(inspect.currentframe().f_code.co_name) + "() started at " + datetime.now().strftime("%Y%m%d_%H%M%S") + " for " + str(self.name).upper())
-        if "testdata" in self.conf:
-            if self.conf["testdata"] == "db":
-                self.m.logInfo("insert db-content " + self.name)
-            self.m.setMsg("data loaded for " + self.name + " is OK")
-        self.m.logDebug(verify, "--- " + str(inspect.currentframe().f_code.co_name) + "() finished at " + datetime.now().strftime("%Y%m%d_%H%M%S") + " for " + str(self.name).upper())
-
-    def read_TsData(self):
-        job = ulrich.program.Job.getInstance()
-        verify = -1+job.getDebugLevel(self.name)
-        self.m.logDebug(verify, "--- " + str(inspect.currentframe().f_code.co_name) + "() started at " + datetime.now().strftime("%Y%m%d_%H%M%S") + " for " + str(self.name).upper())
-        if "db" in self.conf["artifact"]:
-            self.m.logInfo("select db-content "+ self.name)
-        if "lob" in self.conf["artifact"]:
-            self.m.logInfo("check lob if is deleted with db "+ self.name)
-        self.m.setMsg("checkInstance for " + self.name + " is OK")
-        self.m.logDebug(verify, "--- " + str(inspect.currentframe().f_code.co_name) + "() finished at " + datetime.now().strftime("%Y%m%d_%H%M%S") + " for " + str(self.name).upper())
-
-    def init_Testcase(self):
-        """
-        main methode for system-preparation
-        :param self:
-        :return:
-        """
-        job = ulrich.program.Job.getInstance()
-        verify = -1+job.getDebugLevel(self.name)
-        self.m.logInfo("--- " + str(inspect.currentframe().f_code.co_name) + "() started at " + datetime.now().strftime("%Y%m%d_%H%M%S") + " for " + str(self.name).upper())
-        self.m.logInfo("something in "+ self.name)
-        self.m.setMsg("checkInstance for " + self.name + " is OK")
-        self.m.logInfo("--- " + str(inspect.currentframe().f_code.co_name) + "() finished at " + datetime.now().strftime("%Y%m%d_%H%M%S") + " for " + str(self.name).upper())
-
-    def reset_TcData(self):
+    def run(self):
         job = ulrich.program.Job.getInstance()
-        verify = -1+job.getDebugLevel(self.name)
-        self.m.logDebug(verify, "--- " + str(inspect.currentframe().f_code.co_name) + "() started at " + datetime.now().strftime("%Y%m%d_%H%M%S") + " for " + str(self.name).upper())
-        if "log" in self.conf["artifact"]:
-            self.m.logInfo("log rotate  in "+ self.name)
-        if "db" in self.conf["artifact"]:
-            self.m.logInfo("delete db-content "+ self.name)
-        if "lob" in self.conf["artifact"]:
-            self.m.logInfo("lob is deleted with db "+ self.name)
-        if "file" in self.conf["artifact"]:
-            self.m.logInfo("rm files in "+ self.name)
-        self.m.setMsg("checkInstance for " + self.name + " is OK")
-        self.m.logDebug(verify, "--- " + str(inspect.currentframe().f_code.co_name) + "() finished at " + datetime.now().strftime("%Y%m%d_%H%M%S") + " for " + str(self.name).upper())
+        if job.program == "check_environment":
+            self.check_Instance()
+        elif job.program == "init_testset":
+            self.prepare_system("testset")
+        elif job.program == "init_testcase":
+            self.prepare_system("testcase")
+        elif job.program == "test_system":
+            self.test_System("test")
+        elif job.program == "test_system":
+            self.test_System("test")
+        elif job.program == "finish_testcase":
+            self.finish_Test("test")
+        elif job.program == "finish_testset":
+            self.finish_Test("test")
 
-    def load_TcData(self):
-        job = ulrich.program.Job.getInstance()
-        verify = -1+job.getDebugLevel(self.name)
-        self.m.logDebug(verify, "--- " + str(inspect.currentframe().f_code.co_name) + "() started at " + datetime.now().strftime("%Y%m%d_%H%M%S") + " for " + str(self.name).upper())
-        if "testdata" in self.conf:
-            if self.conf["testdata"] == "db":
-                self.m.logInfo("insert db-content " + self.name)
-            self.m.setMsg("data loaded for " + self.name + " is OK")
-        self.m.logDebug(verify, "--- " + str(inspect.currentframe().f_code.co_name) + "() finished at " + datetime.now().strftime("%Y%m%d_%H%M%S") + " for " + str(self.name).upper())
 
-    def read_TcData(self):
-        job = ulrich.program.Job.getInstance()
-        verify = -1+job.getDebugLevel(self.name)
-        self.m.logDebug(verify, "--- " + str(inspect.currentframe().f_code.co_name) + "() started at " + datetime.now().strftime("%Y%m%d_%H%M%S") + " for " + str(self.name).upper())
-        if "db" in self.conf["artifact"]:
-            self.m.logInfo("select db-content "+ self.name)
-        if "lob" in self.conf["artifact"]:
-            self.m.logInfo("check lob if is deleted with db "+ self.name)
-        self.m.setMsg("checkInstance for " + self.name + " is OK")
-        self.m.logDebug(verify, "--- " + str(inspect.currentframe().f_code.co_name) + "() finished at " + datetime.now().strftime("%Y%m%d_%H%M%S") + " for " + str(self.name).upper())
-
-    def test_system(self):
-        """
-
-        :return:
-        """
-        pass
-
-    def spiele_ein(self):
-        pass
-    def erzeuge_Anfrage(self):
-        pass
-    def sende_Anfrage(self, testdata):
-        pass
-    def lese_Antwort(self):
-        pass
-
-    def finish_Testcase(self):
-        """
-        initialization-routine for finish-step
-        :return:
-        """
-        job = ulrich.program.Job.getInstance()
-        verify = -1+job.getDebugLevel(self.name)
-        self.m.logInfo("--- " + str(inspect.currentframe().f_code.co_name) + "() started at " + datetime.now().strftime("%Y%m%d_%H%M%S") + " for " + str(self.name).upper())
-        self.m.logInfo("something in "+ self.name)
-        self.m.setMsg("checkInstance for " + self.name + " is OK")
-        self.m.logInfo("--- " + str(inspect.currentframe().f_code.co_name) + "() finished at " + datetime.now().strftime("%Y%m%d_%H%M%S") + " for " + str(self.name).upper())
-
-    def collect_system(self):
-        """
-        After the test the test data of each component should be selected again - to get the post-condition.
-        In each component is configured how these data can be collected.
-        In this phase the collected data have to be transformed to comparable files.
-        :return:
-        """
-        pass
-
-    def collect_TcArtifact(self):
-        """
-        collects the artifacts from the test-system.
-        the result is written as original in subfolder {tcorigin}
-        post: a further contact zo the test-system is not necessary
-        :return:
-        """
-        job = ulrich.program.Job.getInstance()
-        verify = job.getDebugLevel(self.name)
-        if "log" in self.conf["artifact"]:
-            self.m.logInfo("get files in for "+ self.name + " in " + self.conf["artifact"]["log"]["path"])
-        if "db" in self.conf["artifact"]:
-            self.m.logInfo("select db-content "+ self.name)
-        if "lob" in self.conf["artifact"]:
-            pass # after selection get file from db
-        if "file" in self.conf["artifact"]:
-            self.m.logInfo("get files in for "+ self.name + " in " + self.conf["artifact"]["file"]["path"])
-
-        self.m.debug(verify, "--- " + str(inspect.currentframe().f_code.co_name) + "() " + str(self.name))
-
-    def split_TcResult(self):
-        """
-        transforms the result from subfolder {tcorigin}.
-        the result is written as utf-8-readable parts in subfolder {tcparts}
-        :return:
-        """
-        job = ulrich.program.Job.getInstance()
-        verify = job.getDebugLevel(self.name)
-        self.m.debug(verify, "--- " + str(inspect.currentframe().f_code.co_name) + "() " + str(self.name))
-        if "log" in self.conf["artifact"]:
-            pass #
-        if "db" in self.conf["artifact"]:
-            pass # stored in table
-        if "lob" in self.conf["artifact"]:
-            self.m.logInfo("move file from db "+ self.name)
-            self.m.logInfo("tidy files in for " + self.name + " in " + self.conf["artifact"]["lob"]["format"])
-        if "file" in self.conf["artifact"]:
-            self.m.logInfo("tidy files in for "+ self.name + " in " + self.conf["artifact"]["file"]["format"])
-
-    def fix_TcResult(self):
-        """
-        fixes the result which is collected and transformed from the test-system.
-        the result is written in comparable form in folder {tcresult}
-        with the identifiable name - like in target
-        :return:
-        """
-        job = ulrich.program.Job.getInstance()
-        verify = job.getDebugLevel(self.name)
-        self.m.debug(verify, "--- " + str(inspect.currentframe().f_code.co_name) + "() " + str(self.name))
-
-    def compare_results(self):
-        """
-        to compare the actual result with the target result has three steps:
-        1 matching each element so you get a comparable pair
-        2 comparing this pair so maybe you get differences
-        3 rating the difference if this can be accepted
-        :return:
-        """
-        pass
 
     def collect_TcResult(self):
         """
diff --git a/components/maintain.py b/components/maintain.py
new file mode 100644
index 0000000..5406278
--- /dev/null
+++ b/components/maintain.py
@@ -0,0 +1,18 @@
+#
+# --------------------------------
+"""
+outside the testrun there are some tasks in order maintain the tests, for example:
+# testrunner to control or execute the testrun
+# set the target-results
+# generate testcases
+# partial cleaning of the storage
+"""
+from datetime import datetime
+import ulrich.message
+import ulrich.program
+import inspect
+import components.component
+
+
+class Maintainer(components.component.CompData):
+    pass
\ No newline at end of file
diff --git a/components/report.py b/components/report.py
new file mode 100644
index 0000000..948286b
--- /dev/null
+++ b/components/report.py
@@ -0,0 +1,15 @@
+#
+# -------------------------------------------------
+"""
+reporting-applications
+"""
+from datetime import datetime
+import ulrich.message
+import ulrich.program
+import inspect
+import components.component
+
+
+class Report(components.component.CompData):
+
+    pass
diff --git a/components/systemInstance.py b/components/sysmonitor.py
similarity index 90%
rename from components/systemInstance.py
rename to components/sysmonitor.py
index 3b7971d..d1bf6ec 100644
--- a/components/systemInstance.py
+++ b/components/sysmonitor.py
@@ -5,8 +5,14 @@ When the test system is installed - especially in a continous pipeline - you don
 installed and if each instance is running. In order to know these fundamental points it should be checked.
 The result could be inserted into a database so you can get an overview over all test environments.
 """
+from datetime import datetime
+import ulrich.message
+import ulrich.program
+import inspect
+import components.component
 
-class SystemMonitor:
+
+class SystemMonitor(components.component.CompData):
 
     def check_Instance(self):
         """
diff --git a/components/testa/CONFIG.yml b/components/testa/CONFIG.yml
index f3cc29f..cd6bb19 100644
--- a/components/testa/CONFIG.yml
+++ b/components/testa/CONFIG.yml
@@ -22,11 +22,19 @@ conf:
     check_environment: "todo"
     init_testcase: "todo"
     finish_testcase: "todo"
-  artifact:
+  system: # look at sysmonitor
+    script: "{dompath}/bin/sysctl.sh" # for checking
+    checks: "status,version,start,stop,restart,available"
+  artifact: # look at testrun
     log:    # log|db|file|lob
       path: "{dompath}/log/debug.log"
       rotate: jmx
       reset:  testcase
       oldfile: "{dompath}/log/debug_{timepattern}.log"
+  catalog: # TODO
+    fields:
+      - field1:
+        type:   "varchar(20)"
+        domain: product # for which stakeholder it is important and a view should be implemented
 
 
diff --git a/components/testa/Testa.py b/components/testa/Testa.py
index 2541903..14acc1f 100644
--- a/components/testa/Testa.py
+++ b/components/testa/Testa.py
@@ -1,7 +1,7 @@
 import components.component
 
+
 class Testa(components.component.Component):
     def __init__(self):
         print('init Testa')
 
-
diff --git a/components/testrun.py b/components/testrun.py
new file mode 100644
index 0000000..86c88b7
--- /dev/null
+++ b/components/testrun.py
@@ -0,0 +1,201 @@
+# abstract class for testrunning-functions
+# ---------------------------------------------
+"""
+The test runs in 3 step:
+1.1 precondition of system
+1.2 test the system
+1.3 postconditions of system incl. comparison
+   ---
+The main test is the testcase but there are superior granularities like
+2.a test-sequence : few test-cases depending in a businessflow
+    therefore you test a testcase without resetting the system
+2.b test-set : some independing test-cases
+    therefore you can test postconditions that works not directly
+2.c test-matrix : a set of test-sets for the whole test
+The granularity could be an implicite parameter in the main-module.
+   ---
+the test could be in different test-levels like
+3.a component/service-test
+    a quick test to check single functions like in component-test, so you have the possibility to test x-product.
+    In difference of developer-test you can run large test-sets
+3.b system-test
+3.c integration-test
+3.d acceptance-test
+the test-level could be a configuration of the test-center or implicite of the application-definition.
+   ---
+the test can check different quality-measures like
+4.a functionality
+4.b
+"""
+from datetime import datetime
+import ulrich.message
+import ulrich.program
+import inspect
+import components.component
+
+
+class Testrun(components.component.CompData):
+    def prepare_system(self, granularity):
+        """
+        In order to preparate the test system test data should be cleaned and loaded with actual data.
+        This can happen on different granularities: for each testcase or for each test sequences or for a test set or
+        for a whole test.
+        The loaded test data should be selected for a later comparison.
+        :return:
+        """
+        job = ulrich.program.Job.getInstance()
+        verify = -1+job.getDebugLevel(self.name)
+        self.m.logInfo("--- " + str(inspect.currentframe().f_code.co_name) + "() started at " + datetime.now().strftime("%Y%m%d_%H%M%S") + " for " + str(self.name).upper())
+
+        self.m.setMsg("checkInstance for " + self.name + " is OK")
+        self.m.logInfo("--- " + str(inspect.currentframe().f_code.co_name) + "() finished at " + datetime.now().strftime("%Y%m%d_%H%M%S") + " for " + str(self.name).upper())
+        pass
+
+    def reset_TData(self, granularity):
+        """
+        the testdata in the component of the testsystem will be resetted
+        correponding with the configuration of the componend
+        :param granularity:
+        :return:
+        """
+        job = ulrich.program.Job.getInstance()
+        verify = -1+job.getDebugLevel(self.name)
+        self.m.logDebug(verify, "--- " + str(inspect.currentframe().f_code.co_name) + "() started at " + datetime.now().strftime("%Y%m%d_%H%M%S") + " for " + str(self.name).upper())
+        if "log" in self.conf["artifact"]:
+            self.m.logInfo("log rotate  in "+ self.name)
+        if "db" in self.conf["artifact"]:
+            self.m.logInfo("delete db-content "+ self.name)
+        if "lob" in self.conf["artifact"]:
+            self.m.logInfo("lob is deleted with db "+ self.name)
+        if "file" in self.conf["artifact"]:
+            self.m.logInfo("rm files in "+ self.name)
+        self.m.setMsg("checkInstance for " + self.name + " is OK")
+        self.m.logDebug(verify, "--- " + str(inspect.currentframe().f_code.co_name) + "() finished at " + datetime.now().strftime("%Y%m%d_%H%M%S") + " for " + str(self.name).upper())
+
+    def load_TData(self, granularity, testdata):
+        """
+        the testdata will be loaded into the componend especially into databses
+        or with import-functions of the component
+        :param granularity:
+        :param testdata:
+        :return:
+        """
+        job = ulrich.program.Job.getInstance()
+        verify = -1+job.getDebugLevel(self.name)
+        self.m.logDebug(verify, "--- " + str(inspect.currentframe().f_code.co_name) + "() started at " + datetime.now().strftime("%Y%m%d_%H%M%S") + " for " + str(self.name).upper())
+        if "testdata" in self.conf:
+            if self.conf["testdata"] == "db":
+                self.m.logInfo("insert db-content " + self.name)
+            self.m.setMsg("data loaded for " + self.name + " is OK")
+        self.m.logDebug(verify, "--- " + str(inspect.currentframe().f_code.co_name) + "() finished at " + datetime.now().strftime("%Y%m%d_%H%M%S") + " for " + str(self.name).upper())
+
+    def read_TData(self, granularity):
+        """
+
+        :param granularity:
+        :return:
+        """
+        job = ulrich.program.Job.getInstance()
+        verify = -1+job.getDebugLevel(self.name)
+        self.m.logDebug(verify, "--- " + str(inspect.currentframe().f_code.co_name) + "() started at " + datetime.now().strftime("%Y%m%d_%H%M%S") + " for " + str(self.name).upper())
+        if "db" in self.conf["artifact"]:
+            self.m.logInfo("select db-content "+ self.name)
+        if "lob" in self.conf["artifact"]:
+            self.m.logInfo("check lob if is deleted with db "+ self.name)
+        self.m.setMsg("checkInstance for " + self.name + " is OK")
+        self.m.logDebug(verify, "--- " + str(inspect.currentframe().f_code.co_name) + "() finished at " + datetime.now().strftime("%Y%m%d_%H%M%S") + " for " + str(self.name).upper())
+
+    def test_System(self, granularity):
+        """
+
+        :param granularity:
+        :return:
+        """
+    def create_Request(self, granularity):
+        pass
+    def send_Request(self, granularity):
+        pass
+    def get_Response(self, granularity):
+        pass
+
+    def finish_Test(self, granularity):
+        """
+        initialization-routine for finish-step
+        :return:
+        """
+        job = ulrich.program.Job.getInstance()
+        verify = -1+job.getDebugLevel(self.name)
+        self.m.logInfo("--- " + str(inspect.currentframe().f_code.co_name) + "() started at " + datetime.now().strftime("%Y%m%d_%H%M%S") + " for " + str(self.name).upper())
+        self.m.logInfo("something in "+ self.name)
+        self.m.setMsg("checkInstance for " + self.name + " is OK")
+        self.m.logInfo("--- " + str(inspect.currentframe().f_code.co_name) + "() finished at " + datetime.now().strftime("%Y%m%d_%H%M%S") + " for " + str(self.name).upper())
+
+    def collect_system(self, granularity):
+        """
+        After the test the test data of each component should be selected again - to get the post-condition.
+        In each component is configured how these data can be collected.
+        In this phase the collected data have to be transformed to comparable files.
+        :return:
+        """
+        pass
+
+    def collect_TcArtifact(self, granularity):
+        """
+        collects the artifacts from the test-system.
+        the result is written as original in subfolder {tcorigin}
+        post: a further contact zo the test-system is not necessary
+        :return:
+        """
+        job = ulrich.program.Job.getInstance()
+        verify = job.getDebugLevel(self.name)
+        if "log" in self.conf["artifact"]:
+            self.m.logInfo("get files in for "+ self.name + " in " + self.conf["artifact"]["log"]["path"])
+        if "db" in self.conf["artifact"]:
+            self.m.logInfo("select db-content "+ self.name)
+        if "lob" in self.conf["artifact"]:
+            pass # after selection get file from db
+        if "file" in self.conf["artifact"]:
+            self.m.logInfo("get files in for "+ self.name + " in " + self.conf["artifact"]["file"]["path"])
+
+        self.m.debug(verify, "--- " + str(inspect.currentframe().f_code.co_name) + "() " + str(self.name))
+
+    def split_TcResult(self, granularity):
+        """
+        transforms the result from subfolder {tcorigin}.
+        the result is written as utf-8-readable parts in subfolder {tcparts}
+        :return:
+        """
+        job = ulrich.program.Job.getInstance()
+        verify = job.getDebugLevel(self.name)
+        self.m.debug(verify, "--- " + str(inspect.currentframe().f_code.co_name) + "() " + str(self.name))
+        if "log" in self.conf["artifact"]:
+            pass #
+        if "db" in self.conf["artifact"]:
+            pass # stored in table
+        if "lob" in self.conf["artifact"]:
+            self.m.logInfo("move file from db "+ self.name)
+            self.m.logInfo("tidy files in for " + self.name + " in " + self.conf["artifact"]["lob"]["format"])
+        if "file" in self.conf["artifact"]:
+            self.m.logInfo("tidy files in for "+ self.name + " in " + self.conf["artifact"]["file"]["format"])
+
+    def fix_TcResult(self, granularity):
+        """
+        fixes the result which is collected and transformed from the test-system.
+        the result is written in comparable form in folder {tcresult}
+        with the identifiable name - like in target
+        :return:
+        """
+        job = ulrich.program.Job.getInstance()
+        verify = job.getDebugLevel(self.name)
+        self.m.debug(verify, "--- " + str(inspect.currentframe().f_code.co_name) + "() " + str(self.name))
+
+    def compare_results(self, granularity):
+        """
+        to compare the actual result with the target result has three steps:
+        1 matching each element so you get a comparable pair
+        2 comparing this pair so maybe you get differences
+        3 rating the difference if this can be accepted
+        :return:
+        """
+        pass
+
diff --git a/finish_testcase.py b/finish_testcase.py
index ec0675e..07f1f50 100644
--- a/finish_testcase.py
+++ b/finish_testcase.py
@@ -22,7 +22,7 @@ if __name__ == '__main__':
     # now in theory the program is runnable
     cm = ComponentManager()
     cm.initComponents()
-    comps = cm.getComponents(PROGRAM_NAME)
+    comps = getComponents(PROGRAM_NAME)
     print("   relevant components for this job: " + str(comps))
     tdata = utils.tdata_tool.getTestdata()
     x.stopJob()
diff --git a/init_testset.py b/init_testset.py
index 719d4fe..091f8c4 100644
--- a/init_testset.py
+++ b/init_testset.py
@@ -22,7 +22,7 @@ if __name__ == '__main__':
     # now in theory the program is runnable
     cm = ComponentManager()
     cm.initComponents()
-    comps = cm.getComponents(PROGRAM_NAME)
+    comps = getComponents(PROGRAM_NAME)
     print("   relevant components for this job: " + str(comps))
     tdata = utils.tdata_tool.getTestdata()
     x.stopJob()
diff --git a/ulrich/componentHandling.py b/ulrich/componentHandling.py
index 1d0e464..cb08d14 100644
--- a/ulrich/componentHandling.py
+++ b/ulrich/componentHandling.py
@@ -16,17 +16,33 @@ import ulrich.message
 import components.component
 import importlib
 import copy
-components = {}
-PARAM_NOSUBNODE = [ "artifact", "components", "instance" ]
+
+comps = {}
+PARAM_NOSUBNODE = ["artifact", "components", "instance"]
+
+
+def getComponents(mainfct):
+    job = ulrich.program.Job.getInstance()
+    verify = -2 + job.getDebugLevel("job_tool")
+    job.debug(verify, "getComponents " + mainfct)
+    out = []
+    for c in comps:
+        job.debug(verify, "getComponents " + c + ": " + str(comps[c].conf))
+        print("getComponents " + c + ": " + str(comps[c].conf))
+        if mainfct in comps[c].conf["function"]:
+            out.append(c)
+    return out
+
 
 class ComponentManager:
     __instance = None
     """ 
     initializes the Manager with all necessary components  
     """
+
     def __init__(self):
         job = ulrich.program.Job.getInstance()
-        job.m.logDebug("applicationscomponente -- " + str(type(job.par)) )
+        job.m.logDebug("applicationscomponente -- " + str(type(job.par)))
         self.components = {}
 
     def initComponents(self):
@@ -34,37 +50,24 @@ class ComponentManager:
         # afterwards set components from parameter-file
         job = ulrich.program.Job.getInstance()
         anw = job.par.application
-        job.m.logDebug("applicationscomponente -- " + str(type(job.par)) )
+        job.m.logDebug("applicationscomponente -- " + str(type(job.par)))
         if not job.conf.confs["applicationen"].get(anw):
             job.m.setFatal("application " + job.par.application + " is not configured")
             return
         for k in job.conf.confs["applicationen"].get(anw):
-            job.m.logDebug("applicationscomponente -- " + k + ":" )
+            job.m.logDebug("applicationscomponente -- " + k + ":")
             self.createComponents(k, 0, "")
 
-
     def setComponents(self):
         # set components from parameter-file
         job = ulrich.program.Job.getInstance()
-        job.m.logDebug("applicationscomponente -- " + str(type(job.par)) )
+        job.m.logDebug("applicationscomponente -- " + str(type(job.par)))
 
     def getComponent(self, compobjname):
         job = ulrich.program.Job.getInstance()
-        verify=-2+job.getDebugLevel("job_tool")
+        verify = -2 + job.getDebugLevel("job_tool")
         job.debug(verify, "getComponents " + compobjname)
-        return components[compobjname]
-
-    def getComponents(self, mainfct):
-        job = ulrich.program.Job.getInstance()
-        verify=-2+job.getDebugLevel("job_tool")
-        job.debug(verify, "getComponents " + mainfct)
-        out = []
-        for c in components:
-            job.debug(verify, "getComponents " + c + ": " + str(components[c].conf))
-            print("getComponents " + c + ": " + str(components[c].conf))
-            if mainfct in components[c].conf["function"]:
-                out.append(c)
-        return out
+        return comps[compobjname]
 
     @staticmethod
     def getInstance():
@@ -81,11 +84,11 @@ class ComponentManager:
         * business-knowledge of the component, especially of their interfaces resp. artifacts
         :param componentName: Name of the component
         :param nr:
-        :param add:
+        :param suffix:
         :return:
         """
         job = ulrich.program.Job.getInstance()
-        verify=job.getDebugLevel("job_tool")
+        verify = job.getDebugLevel("job_tool")
         componentName = componentName.lower()
         print("createComponent " + componentName)
         confs = utils.config_tool.getConfig("comp", componentName)
@@ -118,16 +121,16 @@ class ComponentManager:
             print(vars(c))
             print(vars(c.m))
             if readedPar is not None:
-                print("createComponent 5 a " + name + " : "+ str(readedPar))
+                print("createComponent 5 a " + name + " : " + str(readedPar))
                 for k in readedPar["components"][name].keys():
                     c.conf[k] = readedPar["components"][name][k]
-            components[name] = c
+            comps[name] = c
             self.createComponent(c, nr, suffix)
         else:
             i = 1
             print("createComponent 3 b " + componentName)
             for cn in conns:
-                name = componentName+ "_0"+str(i)
+                name = componentName + "_0" + str(i)
                 c = class_()
                 c.name = name
                 c.conf = confs["conf"]
@@ -139,11 +142,11 @@ class ComponentManager:
                 if readedPar is not None:
                     for k in readedPar["components"][name].keys():
                         c.conf[k] = readedPar["components"][name][k]
-                components[name] = c
+                comps[name] = c
                 self.createComponent(c, i, suffix)
                 i = i + 1
         print("createComponent 9 " + componentName)
-        print(components)
+        print(comps)
 
     def createComponent(self, comp, nr, suffix):
         job = ulrich.program.Job.getInstance()
@@ -154,32 +157,41 @@ class ComponentManager:
                 continue
             self.createComponents(c, nr, suffix)
 
+
 def getComponentFolder(comp):
     return comp.lower()
+
+
 def getComponentModul(comp):
     return comp[0:1].upper() + comp[1:].lower()
+
+
 def getComponentClass(comp):
     return comp[0:1].upper() + comp[1:].lower()
+
+
 def getComponentPath(comp):
     return "components." + getComponentFolder(comp) + "." + getComponentModul(comp)
 
+
 def getComponentDict():
     job = ulrich.program.Job.getInstance()
-    verify=-2+job.getDebugLevel("job_tool")
+    verify = -2 + job.getDebugLevel("job_tool")
     job.debug(verify, "getComponents ")
     out = {}
-    for c in components:
-        out[components[c].name] = {}
-        print("getCompDict " + components[c].name)
-        for k in components[c].confs.keys():
+    for c in comps:
+        out[comps[c].name] = {}
+        print("getCompDict " + comps[c].name)
+        for k in comps[c].confs.keys():
             print("getCompDict " + k)
-            if isParameterSubnode(k): # "artifact" in k or "components" in k or "instance" in k:
+            if isParameterSubnode(k):  # "artifact" in k or "components" in k or "instance" in k:
                 print("getCompDict -b- " + k)
-                out[components[c].name][k] = copy.deepcopy(components[c].confs[k])
+                out[comps[c].name][k] = copy.deepcopy(comps[c].confs[k])
     return out
 
+
 def isParameterSubnode(key):
     for k in PARAM_NOSUBNODE:
         if key in k:
             return False
-    return True
\ No newline at end of file
+    return True
diff --git a/ulrich/program.py b/ulrich/program.py
index 3afb23c..1ed5f02 100644
--- a/ulrich/program.py
+++ b/ulrich/program.py
@@ -39,12 +39,31 @@ jobdef = {
 		"pfiletarget" : "tcparfile",
 		"basedir": "tcbase",
 		"logdir": "{job.par.tcdir}/{log}/log_{tctime}.txt" }
+	"test_system": {
+		"pardef": "tcdir,tdtyp,tdsrc,tdname",
+		"pfilesource": "tsparfile",
+		"pfiletarget": "tcparfile",
+		"basedir": "tcbase",
+		"logdir": "{job.par.tcdir}/{log}/log_{tctime}.txt"}
+	"finish_testcase": {
+		"pardef": "tcdir,tdtyp,tdsrc,tdname",
+		"pfilesource": "tsparfile",
+		"pfiletarget": "tcparfile",
+		"basedir": "tcbase",
+		"logdir": "{job.par.tcdir}/{log}/log_{tctime}.txt"}
+	"finish_testset": {
+		"pardef": "tcdir,tdtyp,tdsrc,tdname",
+		"pfilesource": "tsparfile",
+		"pfiletarget": "tcparfile",
+		"basedir": "tcbase",
+		"logdir": "{job.par.tcdir}/{log}/log_{tctime}.txt"}
 }
 
 
 def setGlobal():
 	pass
 
+
 class Job:
 	__instance = None